聯系我們  |  產品中心  |  信息中心 

ABL1000系列平臺是產品家族中最高性能的小型空氣軸承平臺。Aerotech結合了我們最廣泛的采用最新技術的精密運動控制和定位系統經驗，生產出真正優秀的微型直線空氣軸承平臺，超平滑，高精度。

Mechanical Specifications

Model		ABL10025	ABL10050	ABL10100	ABL10150
Travel		25 mm	50 mm	100 mm	150 mm
Accuracy(1)	LN	±0.2 μm(1) ±1 μm	±0.2 μm(1) ±1 μm	±0.2 μm(1) ±2 μm	±0.5 μm(1) ±3 μm
	LT	±0.3 μm(1) ±2 μm	±0.3 μm(1) ±2 μm	±0.3 μm(1) ±5 μm	±0.5 μm(1) ±5 μm
Repeatability	LN(1)	±50 nm
	LT	±50 nm(1); ±100 nm
Straightness and Flatness(2)		±0.25 μm	±0.25 μm	±0.4 μm	±0.4 μm
Pitch and Yaw		±0.25 arc sec	±0.50 arc sec	±1.0 arc sec	±1.5 arc sec
Maximum Travel Speed(3)		300 mm/s
Maximum Linear Acceleration		1 g (No Load)
Force Constant, Sinusoidal Drive	N/A, pk	3.29
	N/A, rms	4.65
Maximum Load(4)	Horizontal	15.0 kg
Operating Pressure(5)		80 psi ±5 psi
Air Consumption(6)(7)		17.5 SLPM			13.2 SLPM
Moving Mass (No Load)		1.9 kg			4.8 kg
Stage Mass		4.5 kg	5.5 kg	6.4 kg	12.7 kg
Construction		Aluminum Body/Hardcoat
Drive System		Linear Brushless Servomotor

1. Values with Aerotech controls and HAL option.
2. Dependent on flatness of stage mounting surface.
3. Maximum speed based on stage capability; maximum application velocity may be limited by system data rate and system resolution.
4. Max load for XY configuration is 10.0 kg.
5. To protect air bearing against under-pressure, an in-line pressure switch tied to the controller ESTOP input is required.
6. Air supply must be clean, dry to 0° F dew point, and filtered to 0.25 μm or better; recommend nitrogen at 99.99% purity.
7. Maximum expected air consumption for single axis.
8. ABL10150 must be used as the bottom axis of an XY stack.
9. Specifications are for single-axis systems, measured 25 mm above the tabletop. Performance of multi-axis systems is payload and workpoint dependent. Consult factory for multi-axis or non-standard applications.

Electrical Specifications

Drive System	Brushless Linear Servomotor
Feedback	Noncontact Linear Encoder (see signal period options on Order Information page)
Maximum Bus Voltage	Up to 80 VDC
Limit Switches	5 V, Normally Closed
Home Switch	Near Center

Recommended Controller

Multi-Axis	A3200	Ndrive MP/Ndrive CP/Ndrive HLe/Npaq MXR
	Ensemble	Ensemble MP/Ensemble CP/Ensemble HLe/Epaq
Single Axis	Soloist	Soloist MP/Soloist CP/Soloist HLe

Dimensions

• ABL10025/50/100 Single-Axis Configuration
• ABL10150 Single-Axis Configuration
• XY Configuration (ABL10050 shown)

Ordering Information

Ordering Example

ABL10

100

-LT

Ordering Options

Series	Travel Options	Feedback
ABL10	-025 -050 -100 -150	-LT -LN -LT/lower -LN/lower -LT/upper -LN/upper

ABL1000 Series Linear Air-Bearing Stage

Option	Description
ABL1000	Linear air-bearing positioner

Note: Requires clean, dry air supply. In-line under-pressure switch provided.

Linear Stage Travel (X, Y)

Option	Description
ABL10025(1)	25 mm (1 in) travel stage with linear motor
ABL10050	50 mm (2 in) travel stage with linear motor
ABL10100	100 mm (4 in) travel stage with linear motor
ABL10150(2)	150 mm (6 in) travel stage with linear motor

1. ABL10025 can only be used in an XY configuration with the ABL10150 as the lower axis.
2. ABL10150 can only be used as the upper XY axis with an ABL10150 lower axis.

Feedback

Option	Description
-LT	Linear encoder feedback (10 nm resolution); amplified sine output
-LN	High-accuracy linear encoder feedback (2 nm resolution); amplified sine output
-LT/lower	LT option with lower axis cable management
-LN/lower	LN option with lower axis cable management
-LT/upper	LT option with upper axis cable management
-LN/upper	LN option with upper axis cable management